超微粉碎机厂家

咨询热线

13256798563

当前位置:摇钱树娱乐-新闻动态-骏程百科-万能粉碎机加装水冷装置应该注意什么?

neixin.png

万能粉碎机加装水冷装置应该注意什么?

近年来,随着行业标准的提升,以及市场要求的提高,万能粉碎机在原来的构架上,机壳内壁全部经机加工达到表面平滑,改变了以前机型内壁粗糙积粉的现象,使药品、食品、化工等领域的产品生产更符合国家标准,从而达到GMP的要求。
In recent years, with the upgrading of industry standards and the improvement of market requirements, the inner wall of the universal crusher has been machined to achieve surface smoothness on the original frame, which has changed the phenomenon of rough powder accumulation on the inner wall of previous models, and made the production of products in the fields of pharmaceuticals, food and chemical industry more in line with the national standards, so as to achieve the goal. To GMP requirements.
同时,万能粉碎机也是一款绿色环保的机械设备,无污染、噪音小,单独配置集料室、集尘室,使粉尘得到充分的收集,可满足客户对洁净度的要求。
At the same time, universal crusher is also a green environmental protection mechanical equipment, pollution-free, low noise, separate configuration of aggregate room, dust collection room, so that dust can be fully collected, to meet customer requirements for cleanliness.
50型超微粉碎机1.jpg
Model 50 Ultrafine Crusher 1.jpg
从结构设计上来看,万能粉碎机粉碎刀组内设叶片,加大了粉碎室内的气流量,即可保证产量,又可降低粉碎时产生的温度,更适合粉碎一些流动性不好、带粘性的物料。
From the point of view of structure design, the blades in the comminuting knife group of universal comminuter increase the air flow rate in the comminuting chamber, which can ensure the output and reduce the temperature produced during comminution. It is more suitable for comminuting some materials with poor fluidity and stickiness.
万能粉碎机还可以根据用户的特殊使用要求和被粉碎物料的特殊物理、化学性质加装水冷装置。
Universal crusher can also add water-cooling device according to the special use requirements of users and the special physical and chemical properties of crushed materials.
例如,被粉碎物料的熔点较低、燃点较低、受热易发软、发粘,容易造成降低粉碎效果或者无法粉碎,甚至造成燃烧、爆炸等现象,这就有必要在万能粉碎机设备上加装水冷降温装置。
For example, the crushed materials have low melting point, low ignition point, easy to soften and stick when heated, which can easily reduce the crushing effect or can not crush, and even cause combustion and explosion, so it is necessary to install water-cooled cooling device on universal crusher equipment.
据介绍,常用的万能粉碎机水冷装置是在粉碎腔的前壁和后壁分别加装一个密封的水夹,使流动的自来水或者井水不断地流进后壁水夹,再流进前壁水夹,再由前壁水夹回流入后壁,由后壁的出水口流出。水冷装置的目的就是降低粉碎腔里的温度。
According to the introduction, the common water-cooling device of universal crusher is to install a sealed water clamp on the front and back walls of the crushing chamber, so that the flowing tap water or well water continuously flows into the back wall water clamp, then into the front wall water clamp, and then back into the back wall by the front wall water clamp, and out by the outlet of the back wall. The purpose of the water cooling device is to reduce the temperature in the crushing chamber.
中药超细粉碎机
目前,万能粉碎机水冷装置适用于制药、化工、食品等行业的物料粉碎。特别适用于黄芩、甘草、桔梗、当归、干姜、烘干蔬菜等中低硬度粗纤维物料的粉碎,使其能够被彻底粉碎成细粉。
At present, the water-cooling device of universal crusher is suitable for material crushing in pharmaceutical, chemical, food and other industries. It is especially suitable for the crushing of medium and low hardness crude fibre materials such as Scutellaria baicalensis, licorice, Platycodon grandiflorum, Angelica sinensis, dried ginger, dried vegetables and so on, so that it can be completely crushed into fine powder.
超微粉碎机RXT50.jpg
RXT50.jpg Ultrafine Crusher
值得注意的是,万能粉碎机由于进料速度过快,负荷增大,容易造成堵塞。因此建议,在进料过程中,要随时注意电流表指针偏转角度大。
It is noteworthy that the universal crusher is easy to cause blockage due to its fast feeding speed and increased load. Therefore, it is suggested that in the process of feeding, attention should be paid to the large deflection angle of the ammeter pointer at any time.
如果超过额定电流,表明电机超载,长时间过载,会烧坏电机。一旦出现这种情况,应立即减小或关闭料门,也可以改变进料的方式,通过增加喂料器来控制进料量。喂料器有手动、自动两种,用户应根据实际情况选择合适的喂料器。
If the rated current exceeds, it indicates that the motor is overloaded and overloaded for a long time, it will burn the motor. Once this happens, the feeding gate should be reduced or closed immediately. The feeding mode can also be changed, and the feeding quantity can be controlled by increasing the feeder. There are two kinds of feeders, manual and automatic. Users should choose the appropriate feeder according to the actual situation.
此外,由于粉碎机转速高、负荷大,并且负荷的波动性较强。所以,万能粉碎机工作时的电流一般控制在额定电流的85%左右。
In addition, the mill has high speed, high load and strong fluctuation of load. Therefore, the current of the universal crusher is generally controlled at about 85% of the rated current.
从用户的角度来说,设备的特性、工艺路线以及GMP标准等因素都是设备选择时的关键。而对于万能粉碎设备厂家而言,加强技术创新,研发出客户满意的设备是企业立足于市场的重点工作。
From the user's point of view, equipment characteristics, process routes and GMP standards are the key factors in equipment selection. For all-purpose crushing equipment manufacturers, strengthening technological innovation and developing customer satisfaction equipment is the key work of enterprises based on the market.

摇钱树娱乐_168yqs摇钱树国际_168yqs摇钱树国际平台官网

PHONE

13256798563 / 400-766-9788 

E-mail

junchengweifen@163.com

ADDRESS

济南市市中区袁庄会龙工业园

Website

  • 手机客户端
  • 客服微信

摇钱树娱乐 / 关于我们 / 168yqs摇钱树国际 / 工程案例 / 新闻动态 / 服务和支持 / 联系我们 /

版权所有:摇钱树娱乐_168yqs摇钱树国际_168yqs摇钱树国际平台官网 备案号: 鲁ICP备15034461号-3 技术支持: 济南诺商信息 网站地图 XML TXT 流量统计:

太阳城集团